The 1.25" button is a small size: 31.75 mm face, 41.38 mm cut circle and 29.36 mm safe area. 24 fit on a Letter sheet and 25 on an A4 sheet, which makes it easy to fill a whole pack from one page.
For a pack of 24 different buttons, Pro and Ultra let you turn on independent design: every button on the sheet has its own artwork. On the Free plan the sheet repeats one design in every position.
How to print it so the cut lines up
The template has the 41.38 mm cut circle in red, the visible edge in green and the safe area in blue. If the red circle doesn't measure exactly that on paper, the printer's scale is the problem, not the design.
There's a 50 mm ruler in the top margin: measure it with a real ruler before you cut the batch. If it isn't 50 mm, check that the print dialog is set to actual size (100%) and not “fit to page”.
1Print at actual size (100%), not “fit to page”.
2Measure the 50 mm ruler in the top margin.
3If it still doesn't match, open Settings and adjust the scale in the Settings & Calibration window, or download the cut test sheet.
4With paper heavier than 150 gsm, turn on “Heavy paper” in the print window: it trims the printed area by 0.5 mm so the paper doesn't jam in the press.
Blank template to print
A sheet with the cut lines, the visible edge and the safe area, in the same positions the editor uses. It needs a free account and doesn't count toward your downloads.
